The ZL-0008 and ZM-0008 are 8 Zone Paging Microphone Consoles that utilise advanced microprocessor technology to provide features not found on other paging microphones.The Zx-0008 uses momentary activation tactile switches and lights to indicate selected zones. Zones can be left selected indefinitely, thereby making repetitive pages to commonly selected groups easy. Incorporated into the fascia panel are slide windows, allowing for easy on site labeling that can be changed later if required. The console also has a “BUSY” light to indicate if other microphones or system resources are in use. The Zx-0008 requires less cabling than conventional zone paging consoles. Up to 4 microphones to share the same cable and decoder.
TWO MODELS AVAILABLE:
ZM-0008 (microphone output level) for installations up to 150 metres; and
ZL-0008 (line output level) for installations up to 500 metres.
FEATURES
Soft touch switches select the paging zone required.
An adjacent LED indicates zone is selected. Zones can be toggled on and off as required and will
remain selected until altered.
'ALL CALL': Selects all zones, or cancels selection of all zones.
'TALK': Single press activation initiates page to selected zones.
'BUSY': Light Indicates other microphones on the system may be in use.
Conector: XLR Type, Male 5 Pin
Size: 125mm x 165mm x 365mm.
Paging Microphone Decoders, 8 Zone
[caption id="attachment_615" align="alignleft" width="424"] ZR-8-S Decoder Board (Relay Output)[/caption]
ZR-8-S Decoder Board, 8 Zone, Relay Output
Outputs: 8 relay contacts, represent the selected zones on the microphone for the duration the “talk” button is pressed.
“BUSY” Input: Placing a GND on this terminal will illuminate the “BUSY” light on microphone.
“PTT” Output: Open collector transistor output, pulls to GND, if microphone is in use.
Power: 24VDC, 250mA.
Output: Balanced, 0dBm (775mV into 600R)
Size: 153mm x 87mm, (153mm x 102mm including terminals).
[caption id="attachment_618" align="alignleft" width="423"] ZMDEC-3 Decoder Board (Open Collector)[/caption]
ZMDEC-3 Decoder Board, 8 Zone, Open Collector Output.
Outputs: 8 open collector transistor outputs that pull to GND, represent the selected zones on the microphone for the duration the “talk” button is pressed.
“BUSY” Input: Placing a GND on this terminal will illuminate the “BUSY” light on microphone.
“PTT” Output: Open collector transistor output, pulls to GND, if microphone is in use.
Power: 24VDC, 120mA.
Size: 85mm x 80mm.
[caption id="attachment_617" align="alignleft" width="449"] ZR-8 Relay Board[/caption]
Relay Board, 8 Zone, Common Buss or Independent.
An option available for use with the ZMDEC-3, the ZR-8 Relay Router Board can be configured by way of on board jumper links, to suit most multi-zone PA requirements. Can switch either low audio signal levels or Amplifier 100V output. Accepts either "Single Amplifier", 8 Independent Amplifiers or “Amplifier A” and “Amplifier B”. A common relay output can be used to mute music during paging etc.
Power 24VDC
Size 85mm x 160mm.
Desk Paging Microphone 8 Zone
The ZL-0008 and ZM-0008 are 8 Zone Paging Microphone Consoles that utilise advanced microprocessor technology to provide features not found on other paging microphones.The Zx-0008 uses momentary activation tactile switches and lights to indicate selected zones. Zones can be left selected indefinitely, thereby making repetitive pages to commonly selected groups easy. Incorporated into the fascia panel are slide windows, allowing for easy on site labeling that can be changed later if required. The console also has a “BUSY” light to indicate if other microphones or system resources are in use. The Zx-0008 requires less cabling than conventional zone paging consoles. Up to 4 microphones to share the same cable and decoder.
TWO MODELS AVAILABLE:
ZM-0008 (microphone output level) for installations up to 150 metres; and
ZL-0008 (line output level) for installations up to 500 metres.
FEATURES
Soft touch switches select the paging zone required.
An adjacent LED indicates zone is selected. Zones can be toggled on and off as required and will
remain selected until altered.
‘ALL CALL’: Selects all zones, or cancels selection of all zones.
‘TALK’: Single press activation initiates page to selected zones.
‘BUSY’: Light Indicates other microphones on the system may be in use.
Conector: XLR Type, Male 5 Pin
Size: 125mm x 165mm x 365mm.
Paging Microphone Decoders, 8 Zone
ZR-8-S Decoder Board (Relay Output)
ZR-8-S Decoder Board, 8 Zone, Relay Output
Outputs: 8 relay contacts, represent the selected zones on the microphone for the duration the “talk” button is pressed.
“BUSY” Input: Placing a GND on this terminal will illuminate the “BUSY” light on microphone.
“PTT” Output: Open collector transistor output, pulls to GND, if microphone is in use.
Power: 24VDC, 250mA.
Output: Balanced, 0dBm (775mV into 600R)
Size: 153mm x 87mm, (153mm x 102mm including terminals).
ZMDEC-3 Decoder Board (Open Collector)
ZMDEC-3 Decoder Board, 8 Zone, Open Collector Output.
Outputs: 8 open collector transistor outputs that pull to GND, represent the selected zones on the microphone for the duration the “talk” button is pressed.
“BUSY” Input: Placing a GND on this terminal will illuminate the “BUSY” light on microphone.
“PTT” Output: Open collector transistor output, pulls to GND, if microphone is in use.
Power: 24VDC, 120mA.
Size: 85mm x 80mm.
ZR-8 Relay Board
Relay Board, 8 Zone, Common Buss or Independent.
An option available for use with the ZMDEC-3, the ZR-8 Relay Router Board can be configured by way of on board jumper links, to suit most multi-zone PA requirements. Can switch either low audio signal levels or Amplifier 100V output. Accepts either “Single Amplifier”, 8 Independent Amplifiers or “Amplifier A” and “Amplifier B”. A common relay output can be used to mute music during paging etc.
Power 24VDC
Size 85mm x 160mm.
Lyntel Electronics pty ltd 